The setting up of fences shall be regular, tight, solid and beautiful.

圍擋施工過程中，面板不能呈現銹跡，要涂有保護材料。

During enclosure construction, the panel shall not show rust and shall be coated with protective materials.

圍擋施工結束，彩鋼板與鋼管之間鋼管與鋼管之間有必要聯接結實，不得有松動現象。

After the enclosure construction, it is necessary to connect the color steel plate and steel pipe firmly without looseness.

圍擋施工結束，板與板之間聯接平順，直線段要在一條直線上；板與板之間不能留有顯著較大縫隙。

After the enclosure construction, the connection between plates shall be smooth, and the straight line section shall be in a straight line; No significant gap shall be left between plates.

圍擋施工的架體焊接有必要結實，確保承受本市對大的風壓和風雪荷載。

The frame welding of enclosure construction must be strong to ensure that it can bear the heavy wind pressure and wind and snow load of the city.

⑵文明施工

(2) safe and civilized construction

對一切出場的工人都要進行三級教育。

Three level safety education shall be carried out for all workers.

合理選擇制作裝置場地，削減噪音對周邊環境污染。

Reasonably select the manufacturing plant site to reduce the noise pollution to the surrounding environment.

作業時，配備好防護用品及滅火設施。

During operation, safety protection articles and fire extinguishing facilities shall be equipped.

⑶防火防風辦法

(3) fire and wind prevention measures

暫時圍擋建立需分類分組堆積，按防火要求設定距離。消防器材布局合理標準。

For the establishment of temporary enclosure, it needs to be stacked in categories and groups, and the distance shall be set according to the fire protection requirements. Fire fighting equipment layout is reasonable and standard.

用電線路電器設備有必要由具有相應資質電工一致裝置，并配置漏電保護器等防護器材，一致選用三相五線制，即TN-S標準。

It is necessary for the electrical equipment of power lines to be installed by electricians with corresponding qualifications, equipped with leakage protectors and other protective equipment, and uniformly select the three-phase five wire system, i.e. TN-S standard.

建立健全用電動火審批手續。易燃易爆物品辦理“四定（定人定責任定崗位定獎罰）”。

Establish and improve the approval procedures for electric safety hot work. "Four fixed" (fixed person, responsibility, position, reward and punishment) shall be handled for inflammables and explosives.

彩鋼板圍擋抗風力等級為8級，為了更有用的反抗風，需對其進行加固。

The wind resistance grade of color steel plate enclosure is grade 8. In order to more effectively resist the wind, it needs to be reinforced.

柱與柱之間選用鋼筋結實焊接，使圍擋之間聯接更緊密，全體受力，避免倒伏。

The reinforcement shall be firmly welded between the columns to make the connection between the fences more compact, all stressed and avoid lodging.

圍擋內側增設40*40角鐵，柱與柱間選用鋼筋電焊聯接。

A 40 * 40 angle iron is added inside the enclosure, and the column is connected with the column by electric welding.

壓槽面板下方堆積沙袋，壓住底邊，避免底邊被風吹裂。

Sandbags are stacked under the pressure groove panel to press the bottom edge to avoid the bottom edge being cracked by the wind.

每3塊面板為一個距離空地，距離空地距離為300mm，以削減受風受力面積，增加透風率。

Every three panels are an open space, 300mm away from the open space, so as to reduce the wind bearing area and increase the air permeability.

以上的精彩內容來自：濟南蓬發建材有限公司濟南圍擋的介紹及分享，更多內容請繼續關注我們：http://www.dajiajie.cn

The above wonderful content comes from the introduction and sharing of Jinan enclosure of Jinan pengfa building materials Co., Ltd. please continue to pay attention to us for more content: http://www.dajiajie.cn